US14: Jemison Cutting Saddle

Has just been gone over - repairs made, good to go.  Tree is straight, fits a good range of horses - no cracks or breaks.  Full Double rigging, new fenders, new horn cover, new front rigs and connector straps, new flank and billets.  Excellent skirts and woolskin; saddle is in terrific condition, should be some time before any additional repair work is necessary.16" Seat, BW tree, 2" aluminum flat-bottom stirrups.  Saddle is $3,800 new at MJSLB pricing. Click for more info and enlarged images.

US13: Reining Saddle

This nice reining saddle is available due to owner switching disciplines – now cutting, not reining.  It has been stored in a zippered case, and is like brand new.  Don Leson Tree – rawhide covered, 15 1/2" seat, 16” fenders, padded ‘bicycle’ seat – slick out, full basket stamp, light oil finish,  7/8 drop rigging w/Andrews dees.  Saddle located in CA – owner says it has a nice pocket, very comfortable, and easy to sit a stop in.  Click for more info and enlarged images.

US12: Custom Cutting Saddle

15.5" cutting saddle, 8.5" X 6 1/2" gullet, 3" cantle, inskirt rigging. 3/4 stamped with Geometric/Carlos design, Carlos stamped seat and fenders. Twist/Wrap, spotted rosettes, Montana conchos. Stirrups pictured do not go with saddle, will have Nettles stirrups, fully rigged, ready to go.

US11: C.E. Treon 3B Custom Saddle

This saddle was built for a major exhibition. this fine saddle is designed in the style of the late 1800s. Features a traditional 4 button seat, square skirts, monel oxbows. Fully tooled with built in Angora saddle pockets, the saddle also features custom made sterling silver conchos, frog plate, and makers plate by Daryl Davis. Fork: 3B Seat: 16 Cantle: 5h x 12w Shovel Horn: #1 Dally Rig: 5/8 Single Rig Gullet: 6 1/4w x 8h Built: 2003 Contact Info: CE Treon, 817-629-3514

US9: C.E. Treon Hamley Wade 16 Slickout

You won’t find better workmanship! Built by C.E. Treon, on a Hamley Wade Warren Wright tree(12 3/4 front flair), it features a 3/4 single rig flat plate, 4x12 cantle with a cheyenne roll, Guadalahara Wood Post horn w/4 1/2 cap, crossover rope strap, mulehide horn wrap, and twist/wrap stirrup leathers. Fit and finish are second to none, and the seat leather has been inlaid into the saddle fork of - not an easy task! Has been lightly ridden, in like new condition. Contact C.E. Treon: 817-629-3514

US7: RC3 Ranch Cutter Custom Saddle

MJ Liggett Ranch Cutter – 15.5” hard seat, TD horn, 8” front, 3” cantle.  Full Carlos Border stamp, T/W fenders, half holes for finer adjustment, Nettles stirrups.  Fully strung, Montana Conchos, spotted rosettes.  Fully rigged, ready to ride.  Excellent condition.  Buyer pays shipping/handling charges – appx. $70.00. **Thank you, Mike and Teresa Webb, Natoma, KS, for purchasing this nice saddle!**

US6: C.E. Treon Custom Saddle

Custom-made by C.E. Treon: 15” seat, Hamley Wade Fork, ¾ Single Flat Plate rigging, 4” high by 12” wide cantle with Cheyenne Roll.  Horn is 4.5” Wood Post Guadalahara Cap Tree: Warren Wright (12 3/4" Front Flair) Click for more info and enlarged images.

US5: C.E. Treon Custom Saddle

Custom-made by C.E. Treon: 15.5” seat, Bowman Fork, 7/8 Double Flat Plate rigging, 3” high cantle with Cheyenne Roll.  Horn is 4" high, 2 3/4" cap, Dally, Rawhide Rim Gullet: 7 1/2" high, 6 1/4" wide. Click for more info and enlarged images.

US3: Reining Saddle

One-of-a-kind custom reining saddle, handmade by Chuck Treon. Built in 2000 and lightly used through 2 show seasons, this saddle is built on a CS Reiner tree. It features a 15 1/2" three-quarter slick-out padded seat, twist  and wrap fenders, 3/4 basket stamp, in skirt rigging, and silver conchos and tips, corner plates, and horn cap. The silver plates on the near latigo carrier and cantle are personalized and do not sell with the saddle.

US2: M.J. Liggett Reining Saddle

15" Custom Reining Saddle. Herman Oak Chestnut leather, Buster Welch tree, padded seat, full stamped - basket, border and floral, butterfly skirts, inskirt rigging, twist and wrap stirrup leathers, Nettles stirrups, accented with natural kangaroo buckstitching and sterling overlay conchos. Lightly used, nicely broke in, fenders are long - 36"-38" inseam.

US1: M.J. Liggett Cutting Saddle

15 1/2 seat, 8” gullet, 3 1/2 cantle, (Hand tooled with ‘Catch That Cow’), Arizona Bars. Rough out seat and fenders, Buster Welch front, Texas Dally horn, Basket stamped front, skirts and fenders with a border stamp accent on seat and fenders. Modified flat plate rig. Skirts feature a leg cut for a closer feel. Fully strung, double-stacked and spotted rosettes. Fenders have a twist/wrap, does not come with the oxbows pictured, will sell with Nettles flat bottom stirrups. **Thank you, Mary Etta.**

Back to Top