Back to Top


Liggett Saddles Made to Order

BB1: BW Reining Saddle
SOLD - Orders accepted

Built for Bruce Blanchard on a Buster Welch tree.  Features a 3/4 basket stamp, with a decorative line on fenders and seat, and a rough-out padded seat.  All stainless hardware, spotted rosettes, sterling overlay conchos, twist/wrap, and Nettles flat bottom stirrups,  complete with flank and billets.  Hermann Oak skirting, and bark-tanned woolskin.  Click for detailed images.

BCLW1: Wade Saddle
SOLD - Orders accepted

15 1/2" Seat - 4" cantle, wood post horn.  Strictly utilitarian, this nice using saddle is all roughout, heavy Wickett & Craig skirting.  Features include flat plate rigging, all stainless hardware from Jeremiah Watt, straight up rawhide binder, rawhide binder on horn, cross-over rope strap, 4" flank, T/W fenders, and custom-made buck rolls.  Oxbows provided by owner - not available. Click for detailed images.

BL1: Reining Saddle
SOLD - Orders accepted

15" Custom Reining Saddle. Herman Oak Chestnut leather, Buster Welch tree, padded seat, full stamped - basket, border and floral, butterfly skirts, inskirt rigging, twist and wrap stirrup leathers, Nettles stirrups, accented with natural kangaroo buckstitching and sterling overlay conchos. Click for detailed images.

BS1: Basket Stamped Reining Saddle
SOLD - Orders accepted

3/4 Basket Stamped Reiner.  CS tree, 8" gullet, 16" seat, 3" cantle.  Herman Oak skirting leather.  Inskirt, butterfly skirts, twist and wrap fenders, slickout, padded seat.  Accented with sterling overlay conchos, and dark brown kangaroo buckstitching on front, seat and cantle.  Modified aluminum bell stirrups. Click for detailed images.

CB1: Cutting Saddle
SOLD - Orders accepted

Cutter, BW front, OD4 horn, Dropped Rigging. 16 1/2 seat length, 8 1/2 X 6 1/2 front, 3 cantle. Features a leg cut on the skirts, fully strung, slick seat and fenders, with rough out skirts, front, and backhousing. Nettles stirrups complete the picture!  Very nice, clean lines make this pretty saddle a minimalists’ dream! Click for detailed images.

CD1: Cutting Saddle
SOLD - Orders accepted

Custom built for Carol Dewrell on a Buster Welch tree, OD4 horn.  Medium oil finish, Trumpet flower carved w/LJ9 Border stamp.  Inskirt rigging, all stainless hardware, twist/wrap on fenders, w/Nettles flat-bottom stirrups, complete w/flank and billets.  Custom silver conchos and dyed background on the floral areas really make this saddle stand out, a beautiful example of our work.  Click for detailed images.

CH1: Cutting / Cowhorse Saddle
SOLD - Orders accepted

16" seat, Buster Welch tree, OD4 horn, 8" gullet, 3" cantle.  18" fenders, should work for 32" to 38" inseams.  Floral, Border, and Basket design.  Nettles flat-bottom stirrups.  Twist and wrap on fenders.  Sterling overlay conchos. Click for detailed images.

Congratulations and thank you to Janet Williamsen of DreamHorse.com, on the purchase of  this nice saddle!

CS1: Geometric Stamped Cutting Saddle
SOLD - Orders accepted

3/4 Geometric stamped Cutter.  OD4 horn, Buster Welch tree, 15 1/2" seat, 8" gullet, 3" cantle.  Slick out, Herman Oak skirting leather, dark oiled. Inskirt,  twist and wrapped fenders, rawhide covered oxbow stirrups.  Sterling overlay conchos, strings on rear housing and billets. Click for detailed images.

CS2: Cutting Saddle
SOLD - Orders accepted

Buster Welch tree, OD4 horn. Inskirt rigging, full Carlos border stamped, Russet Hermann Oak leather with dark oil, Twist and Wrap on the fenders, Nettles stirrups, and set off with Montana Silver conchos and spotted rosettes.  Click for detailed images.

Congratulations and thank you to JP Bell!

CS3: Cutting Saddle
SOLD - Orders accepted

15.5" cutting saddle, 8.5" X 6 1/2" gullet, 3" cantle, inskirt rigging. 3/4 stamped with Geometric/Carlos design, Carlos stamped seat and fenders. Twist/Wrap, spotted rosettes, Montana conchos.

CS4: Cutting Saddle
SOLD - Orders accepted

Cutting Saddle, 16 1/2" seat, 8.5X6 1/4" front, 3" cantle, OD4 horn. Inskirt rigging, all stainless hardware, 3/4 Carlos border stamp. T/W on fenders, Nettles work 2" work stirrups, Montana conchos. Click for detailed images.

Thank you, Robert Kelly!  And many thanks to JP Bell for his recommendation!

CS5: BW Cutter
SOLD - Orders accepted

OD4 horn, Inskirt w/rear dees.  16" seat, 8 1/2" front, 3" cantle.  Hermann Oak skirting - dark oiled, bark-tanned woolskin, stainless hardware, highest quality materials thruout.  3/4 Carlos stamp, Twist/Wrap, and aluminum flat bottom stirrups complete this pretty saddle.  Click for detailed images.

Thank you Diane Churchill, Jordan, MN - thanks again to JP Bell for his recommendation!

DL1: Border Stamped Cowhorse Saddle
SOLD - Orders accepted

This saddle features inskirt rigging, all stainless hardware, twist/wrap, Hermann Oak skirting (as in all of our saddles), bark-tanned woolskin, spotted rosettes, Montana silver conchos, and Nettles stirrups.  A padded seat and simple border stamp complete the picture. Click for detailed images.

EH1: Custom Silver Reining Saddle
SOLD - Orders accepted

Custom Reining Saddle for Elizabeth Holtz, TN, available with matching breastcollar and braided headstall. Floral carved with border stamp and basket background with personalized custom silver.  The basket stamp has a floral center for a feminine touch. Nevada twist/wrap on fenders, inskirt rigging and silver engraved stirrups.  A gorgeous saddle! Click for detailed images.

JD1: Cutting Saddle
SOLD - Orders accepted

Custom-built for Jerry Durant. Features a Buster Welch tree, Nettles flat bottom stirrups, twist/wrap on the fenders. This cutting saddle has a '7-spot' floral design, and a 3/4 Carlos Border. It is fully strung, with Montana silver conchos, accented by spotted rosettes. Click for detailed images.

JG1: Cowhorse/ Reining Saddle
SOLD - Orders accepted

Cowhorse/Reining Saddle custom made for Joshua Green, WA. Built on a 16" BW tree, 8X6.5 gullet, 3" cantle, OD4 horn. Russet Hermann Oak skirting leather, with a medium oil finish. This saddle features sterling overlay silver, Oak/Border/Basket tooling and stamping. Kangaroo buckstitching, turned front, slick-out cream color padded seat, and butterfly skirts. Click for detailed images.

JG2: BW Reining Saddle
SOLD - Orders accepted

This beautiful saddle is a reining version of JG1 - features a full stamp and carve with a border, oak leaf, and basket motif.  Extra carving on front, under gullet, etc.  Sterling overlay conchos, tips and corner plates add to the richness of this ride.  Personalized silver slot plate at the billet slot and  Includes the added touches of kangaroo buckstitching, twist/wrap fenders and Nettles stirrups. Click for detailed images.

JL1: Geometric Stamped Reining Saddle
SOLD - Orders accepted

3/4 Geometric Stamped Reiner.  CS tree, 8" gullet, 3" cantle, 16" seat.  Wickett Chestnut skirting leather, Inskirt. Butterfly skirts, padded, slickout seat, kangaroo buckstitching on front, seat, and cantle.  Twist and wrap fenders, Nettles flat bottom stirrups, sterling overlay conchos and tips. Click for detailed images.

JL2: Floral Tooled Reining Saddle
SOLD - Orders accepted

16” Reining saddle, CS tree, 8” gullet, 3” cantle. Butterfly skirts, twist and wrap fenders, Nettles stirrups. Accented with kangaroo buckstitching on the front, seat and cantle, slick out padded seat. Floral carved with a Carleeto border. Sterling overlay conchos, corner plates, billet plates, tips, and gullet tacks. Click for detailed images.

JL3: Tooled & Stamped Cowhorse Saddle
SOLD - Orders accepted

15.5” Cowhorse saddle. Click for detailed images.

JM1: Tooled & Stamped Reining Saddle
SOLD - Orders accepted

BW tree, 8X6 1/4 X16X3, OD4 horn. Russet Herman Oak, medium oil finish, fully carved and stamped, inskirt rig, fenders are lined, with a twist/wrap. This saddle features a smooth, no welt swell cover, turned under at the gullet, and braided below the back of the horn. Accented with kangaroo buckstitching, brown padded seat, sterling overlay conchos and tips, spotted rosettes. Nettles stirrups complete this nice saddle. Click for detailed images.

KH1: Hardseat Reining Saddle
SOLD - Orders accepted

16” Hardseat Reining Saddle – Sold to Kim Horn.  CS tree, 8” gullet, 3” cantle.  Butterfly skirts, twist and wrap fenders, Sterling overlay, engraved bell stirrups.  Accented with kangaroo buckstitching on front and cantle.  11 spot floral, carlito border, with scale pattern background, very unusual and pretty.  Sterling overlay conchos, tips, and horn cap. Click for detailed images.

LP1: Roughout Cutting Saddle
SOLD - Orders accepted

BW, AZ Bars, 15 1/2" seat, 8" gullet, 3 1/2" cantle, TD horn, modified double flat plate, fully strung, double stacked spotted rosettes with stainless slotted conchos, and twist/wrap. Basket/Border stamped, RO seat and fenders are Carlos border stamped. (Oxbows provided by owner in this particular saddle.) Click for detailed images.

MA3: Hardseat Cutting Saddle
SOLD - Orders accepted

BW tree, 8X6 1/4 X16X3, OD4 horn. Russet Herman Oak, dark oil finish. Full border stamp – Carlos. This hard seat cutter features Montana silver conchos, Antique engraved spotted rosettes, Inskirt rigging, Twist and Wrap on fenders, and Nettles stirrups. The following seat size is available in this style tree:  (1) 16".  This tree is on hand, no wait on tree order. Click for detailed images.

The last saddle arrived a little while ago. It is beautiful! You did another wonderful job and I really do appreciate all of your care and hard work. I really do love my other one and I can hardly wait to ride this one. Not only are they beautiful but they are so very comfortable to ride. I tell everyone I can that you made the saddle and I hope you will get some additional business as a result. Thank you again. I hope some day to be able to get several more (maybe I'll win one!!!) - Marguerite A.

MC1: Cutting Saddle
SOLD - Orders accepted

Built for Mary Cavanaugh - BW tree, OD4 horn, 15 1/2" Seat, 8 1/2" front, 3" cantle.  This pretty saddle features our trumpet flower with the LJ9 border.  Inskirt rigging, T/W, stainless hardware.  Hermann Oak skirting - dark oiled, bark-tanned woolskin, all premium materials thru-out.  Silver conchos, and a rope roll on the cantle set this saddle apart from the rest of the herd!  Click for detailed images.

PS1: Reining Saddle
SOLD - Orders accepted

15 ½” Reining Saddle – Custom built for Pam Schroeck.  CS tree, 8” gullet, 3” cantle.  Butterfly skirts, twist and wrap fenders, Nettles stirrups.  Slick out padded seat, accented with kangaroo buckstitching on front, seat, and cantle.  Floral carved with Carlito border, basket stamped background.  Sterling overlay conchos. Click for detailed images.

"Michelle, I have to tell you how much I love the wonderful reining saddle you made for me.  Not only is it beautiful, but it is the most comfortable saddle I've ever owned.  My legs hang just right and swing forward easily, and my sometimes-shaky non-pro fanny stays secure in the pocket through every stop and spin.  It fits both me and my gelding perfectly.  Thanks for all your good work and attention to details on this saddle." - Pam S.

QR1: Steer Tripping Saddle
SOLD - Orders accepted

14" Steer Tripping saddle, built on a Felton Roper, 6 1/2" X 7" front, 3" cantle.  This beautiful saddle features a full carve, 2" floral design, a modified flat plate rigging, extra wide flank for its intended use.  Stirrups are covered, carved and handstitched, and include a pocket for the owner's special 'gal leg' hoofpick.  A 'one of a kind' custom creation! Click for detailed images.

RC1: Ranch Cutter
SOLD - Orders accepted

Ranch Cutter - TD horn, Buster Welch tree,  8" front, 15 1/2" seat, 3" cantle.  3/4 Crazy Basket Stamped.  Roughout seat and fenders, flat plate rigging, custom steel oxbows, fully strung.  Accented with all brass hardware, including brass conchos and spotted leather conchos, as well as a straight up, rawhide bound cantle binding, pinked and tacked with brass tacks. Click for detailed images.

RC2: Ranch Cutter II
SOLD - Orders accepted

15 1/2” seat, fenders adjust from 30” to 38” inseam, slick out, 3/4 Carlito Border stamp, Inskirt with leg cut, all stainless hardware. Nettles flat-bottom stirrups. Stainless conchos, fully strung. Built on a BW tree, 8” X 6 1/4” front, 3” cantle.
The following seat sizes are available in this style tree:  (1) 15", (1) 16".  These trees are on hand, no wait on tree order. Click for detailed images.

"The saddle arrived on Thursday – had it on my horse 20 minutes later!  Fits me and my horse great – very comfortable!  Thank You!!”  - Dorothy F.

RC3: Ranch Cutter III
SOLD - Orders accepted

15 1/2" slick padded seat, 8"X 6 1/4" front, 3" cheyenne roll cantle.  #9 Horn (3" tall with 2" cap).  Features a padded seat, 7/8 dee ring rigging, Hermann Oak skirting, bark tanned woolskin, and a 3/4 LJ9 border stamp.  Added touches are Montana conchos over spotted rosettes and the twist/wrap on the fenders, along with Nettles 2" flat-bottom stirrups.  Same tree in it as the RW1. Click for detailed images.

RD1: Custom Ranch Cutter
SOLD - Orders accepted

Custom built for Russ DeCordova.   16" seat, 8 1/2" front, 3" cantle, TD horn.  3/4 Basket - Personalized with ranch brand in basket stamp center.  Fully strung, double-stacked rosettes with stainless slotted conchos.  7/8 Drop Rigging, Stainless hardware and dees thru-out, Hermann Oak skirting leather - dark oiled, bark-tanned woolskin, Nettles flat-bottom stirrups. Click for detailed images.

RW1: Cutter
SOLD - Orders accepted

BW Cutter built for Roger Wagner. 16" seat, 8 1/2"X6 1/4" gullet, 3" cantle, #9 horn, full double rigging, 3/4 Carlos Border Stamp, Spotted leather rosettes, Montana silver, Twist/Wrap, Nettles stirrups. Click for detailed images.

ST1: Youth Cutter
SOLD - Orders accepted

Youth Cutter, BW tree, 13.5” seat, 3/4 Carlos Border Stamped, inskirt rigging, stainless hardware and conchos, fully strung. Padded seat. Click for detailed images.

TM1: Reining Saddle
SOLD - Orders accepted

This saddle built for Tim McQuay. 16” BW tree, 8”X6 1/4" front, 3” cantle. 3/4 Basket stamped. Inskirt, Butterfly skirt style. Extra drop on fenders, padded seat, laced bell stirrups.  Click for detailed images.

‘What can I say – it’s good! Don’t change anything on my next one!’ - Tim McQuay
(We did add ½” to the cantle height)

TM2: Reining Saddle
SOLD - Orders accepted

Another saddle built for Tim McQuay. 16” BW tree, 8”X6 1/4" front, 3.5” cantle. Inskirt, Butterfly skirt style. Extra drop on fenders, padded seat, laced bell stirrups.  Click for detailed images.

Back to Top